The Ford Escape has turn out to be among the finest-selling, small sport-utility automobiles in America because of its low value and environment friendly design. The SUV’s towing capability implies that it might probably tow heavy masses by treacherous terrain. You may connect a trailer hitch to your Escape in your driveway or garage after you purchase a package and collect some tools.
Ford Escape Trailer Hitch Installation Instructions
1. Raise the automobile with a jack and securely place assist stands earlier than you start working beneath the car. Lower the exhaust pipe by disconnecting the rubber hangers that hold it in place.
2. Pull the bolts from the set up kit that is included with your trailer hitch by means of the frame on both sides of the vehicle. Run a bolt leader by the bolt hole and out the entry gap, then attach the bolt by screwing on the washer, and pull the leader back through till the bolt rests inside the bolt hole.
3. Install the hitch utilizing the 2 bolts first, with help from one other person. Tighten the bolts in order that the hitch is aligned with the opposite bolt holes. Pull the remainder of the bolts via the frame and screw them into the hitch. Do this on each sides. With the last couple of bolts, you could have to move the hitch slightly as a result of the holes won’t be lined up exactly. Wiggle the hitch to align the holes so you’ll be able to slide the bolt through. Tighten each bolt.
4. Replace the rubber hangers and reconnect the exhaust pipe to the frame. Decrease the automobile from the assist stands.